SVA0.S10 VALVE SERIES

SAE Cartridge - 250 bar

Directional Valve - 4/2 Spool Type

Scheme F

HYDRAULIC SYMBOL

Cross section

Cavity

SAE10-3

DESCRIPTION

A solenoid valve operated, 4-way, 2-position, spool-type, direct-acting, screw-in hydraulic cartridge valve. In the de-energized mode

the SVA0.S10 blocks flow at all ports. In the energized mode the SVA0.S10 flow paths are 1 to 4 and 3 to 2. The rigid design using

a 1-piece body contributes to minimize the effect of eccentricities in cavity and provides great reliability. Low pressure drop thanks

to optimized paths.

TECHNICAL DATA

80 cm

/ min @ 250 bar

EXTERNAL COMPONENT TREATMENT

Zn/Fe - standard (96h)

Zn/Ni (720h) (Upon customer request)

MAXIMUM FLOW

25 l/min

MAXIMUM OPERATING PRESSURE

250 bar

WEIGHT

0,425 kg

OIL TESTING CONDITIONS

ISO VG 46 cSt

TECH. SPEC. FOR CHARACTERIZATION

see page 807

ORIENTATION

No restrictions

INSTALLATION TORQUE

40-45 Nm

FILTRATION

20/18/15 ISO 4406 (maximum filtration admitted)

VISCOSITIES

7,4 to 420 cSt

FLUIDS

Mineral-based or synthetics with lubricating properties

OIL TEMPERATURE RANGE

-30° C to 110° C

O-RING TEMPERATURE RANGE

-30° C to 110° C (standard sealing NBR - BUNA - N)

-35° C to 140° C (HNBR - Upon customer request)

-23° C to 225° C (FKM - Upon customer request)

Hex.27

MAXIMUM INTERNAL LEAKAGE

COIL

26W (for more details see page 769 - 781)

S V A 0

ORDERING CODE

S 1 0 0 0

. .

F 0

Valve basic code

Size

Marking

0= Standard. S= Inductive position

switch upon request

0 = Standard factory marking.

Customized marking can be done

upon request.

FLOW PATH

7/8-14 UNF with Ø19,05, Ø17,47

and Ø15,87 noses sizes

3 to 2 and 1 to 4 (Energized)

All ports blocked (De-Energized)

Note

Customized nut can

be selected

Note

Solenoid valves are designed to work with D.C. current supply, for

A.C. a RAC coil and connector with rectifier must be used.

SOLENOID Valves

Specifications may change without notice.

697 698